各位大哥，能介绍一下信越１３１０吗？

如题！有此产品的可以和我联系．
fql@aosenchina.com
QQ:396773096

矽利康KE-1310是透明的双组份高强度、高透明、高扯裂性、手感柔软、粘接力强、收缩率小、可操作时间达5小时的新型矽利康商标植胶；采用日本先进技术的新型材料(是目前广泛应用于立体烙印商标、服装印字、织带、丝印印字之优质产品)。适合非常复杂的形状或高精密度的模型。

本人在上海，三井物产的。做进口有机硅产品，多多交流啊！13818982025

KE1310是一种高抗撕的精密模具胶,国内多用来做商标生产.
Moldmaking Silicone for the Best Reproduction
Molds of Your Rapid Prototyped Part

THE MOLDMAKER’S CHALLENGE:

Produce a moldmaking silicone for stereolithographic generated parts that

Will not damage the master

Allows the molder to meet those critical deadlines that have no room for error

Compatible with Cibatool  SL5170, SL5180 and SL5190

Provides multiple pulls per mold

Offers visible air management during the pour and before mold cures

Offers extremely low shrinkage

Has good resin resistance

OUR SOLUTION:
Shin-Etsu Addition Curing, Clear, Moldmaking Silicones

SHIN-ETSU KE 1310ST Premium grade Silicone with unique chemical additive to provide unsurpassed urethane and epoxy resin resistance.  Ideal for short run production where many parts are produced from a single mold.

GENERAL PROPERTIES

Before Cure   After Cure (25 hrs at 25?C)  
   Appearance Translucent     Hardness 40 Shore-A
   Mix Ratio, base: catalyst 10:1     Tensile Strength 850 psi
   Specific Gravity, mixed, 25?nbsp; C 1.07     Tear Strength 125 ppi
   Viscosity, mixed, 25?nbsp; C 75,000 cps     Elongation 340%
   Pot life, 25?nbsp; C 1.5 hrs     Linear Shrinkage <0.10%
RECOMMENDED CURE SCHEDULE
24 hr at 25?nbsp; C
   60 min at 100?nbsp; C
  
120 min at 50?nbsp; C
   20 min at 150?nbsp; C